Multi Fibre Apparels Limited

Member Type
Seller
Country
Bangladesh
Industry
Products
Apparel, Pants, Sweat Shirts, Swimwear, Tank Top

Company Introduction



FACTORY PROFILE OF
MULTI FIBRE APPARELS LIMITED

Contact persons:
Engr.Md. Sohel Mollah (MBA)
Chief Operating Officer
Mobile & Whatsapp: +8801791462844
Email: coo.multifibreapp@gmail.com & coo@multifibre.net
Web: www.multifibre.net

Board of Directors:
Chairman & Managing Director: Ziba Akhter
Director: Aymun Nesa

Head office: Sahera Tropical Centre, 5th floor, Suite No: 9/A, 218, Dr. Kudrat-e khuda road (Elephant road), Dhaka-1205, Bangladesh.

Factory Address: Fatullah, Narayangonj, Bangladesh

Introduction:
Multi Fibre Apparels Limited is 100% export oriented Intimates Garments manufacturing company which was established on 2010. It is an intimates company with huge potentialities. The future of this company is very promising since management of this company is very much experienced in garments sector to make the factory grade -1. Within short time the company will built up compliance with international labor laws and environmental standard. The company is located at Fatullah, Narayangonj which is 32 Kilometers from Dhaka international Airport on Dhaka-Chittagong Highway.

The company is fully excellent in setup to manufacture high quality garments like knitted polo shirts, t-shirts, tank top, sweat shirts, underwear ladies pantry & bra, boxer short, cargo short, active wear, hoodies, pullover, yoga pant, woven shirt, pants etc.

Multi Fibre Apparels Ltd has a wide range source to produce of solid dyed, Stripe and all over printed fabric, Single jersey/Pique, interlock/rib, fleece/terry, all types of woven fabrics with composition of cotton, viscose, polyester, spandex etc. (Reactive, Disperse, acid and pigments) using a variety of design provided by the customer.

Garments Products: Knitted polo shirts, t-shirts, tank top, sweat shirts, underwear ladies pantry & bra, boxer short, cargo short, active wear, hoodies, pullover, active wear, yoga pant, woven shirt, pants etc.

Finished Fabrics: Single jersey/Pique, interlock/rib, fleece/terry, all types of woven with composition of cotton, viscose, polyester, elastan etc.

Product & Capacity:
? Production Lines: At present, 14 lines, 5 panties, 5 boxer/Brief & 4 brassier. Within October, we will have 43 lines and line break down and capacity will be as below: ? Ladies Bra x 14 Capacity: 350,000pcs
? Ladies Panty x 14 Capacity: 700,000pcs
? Men`s Brief/Boxer x 9 Capacity: 450,000pcs
? Swimwear x 3 Capacity: 150,000pcs
? Tank Top x3 Capacity: 150,000pcs


Sample, Pattern and Design department:

The department is equipped with 38 sewing machines to produce sample and collection according to customer specification. All samples are fitted on appropriate fitting-forms and on live models before sending the sample to customers. The department will be equipped with the Gerber CAD and digitized pattern and all production markers will be produced at optimum efficiency.

Cutting Department:
The cutting Department is equipped with fabric inspection, straight Knife, band knife and stripe pilling etc. to cut between 40,000 pieces to 50,000 pieces each day. 100% of the fabrics are inspected and laid on cutting tables for relaxation before cutting.

Sewing department:
The sewing department is equipped with modern intimates’ machineries and attachments. The mechanical department is fully equipped with specialized attachment making facilities. The lines are laid out in a manner to allow 100% inspection of the garments during production. Currently 8 lines are running for intimate garment for children and man`s and ladies’ underwear. The lines will be extended into 45 within December 2017.

Finishing Department:
The completed garments in size lots are cleaned of loose thread, dust etc. in vacuum suction device, inspected and finished with steam iron on vacuum tables. After putting all packing accessories each piece is checked with needle detector before packing for shipment. For all orders, internal AQL is determined before buyer`s inspection.

Raw Materials source:
Multi Fibre Apparels Ltd. source most of the required fabric and Accessories from local and abroad for different production. Items like hanger, poly-bag, printed boxes, woven and heat transfer label are also available in local source.

Fabrics:
We have a strong fabric sourcing team for using a wide range of fibers,
100% cotton, polyester, nylon, various blends, micro-fibers with or without spandex and yarn dyed and printed fabric and arrange within 35 to 60 days.

Packing and Store:
All garments are fully inspected and packed before inspection by customer`s representative. A large area is allocated for the proper storage of the carton before shipment. The packing and store area is highly restricted.

Quality Control:
The QA department personnel conducts inspection of fabric, cutting bundle preparation and 100% garments quality inspection and recording at all stages of production.

1)The fabric weight, yarn count and composition are checked before fabric cutting.

2) The testing report of color fastness to wash, shrinkage and other dimensional stability are always collected from our fabric dyeing and printing supplier.


Commitment to the Valued Customers:

High quality products.
Competitive price.
On time delivery.
Prompt response and long term business relationship.
Conformity with international labor and Environmental Standard:

Multi Fibre Apparels Limited is going to achieve the following Audit and Compliance with in short time.
? BSCI ? SEDEX ? OEKO-TEX ? ACCORD ? WRAP


Quality Assurance:

We have skilled team of quality controllers who keep a firm check to every garment to maintain quality of standard. Generally, the quality control team maintains 1.5 AQL during in line inspection. On the requirement of customer, the AQL is flexible. There are Q.C. people stationed in all production steps who keep a written track record of all garments that is checked by the Q.C. team and a report is sent to the Q.A. Manager who is responsible to Top Management. To implement all checking effectively, we have sufficient amount of Quality inspectors’ station in every production line. Upon request from customer we may conduct independent final inspection at the desired AQL level.


The way to execute a new order:
To start with Multi Fibre Apparels Limited, your team can visit our factory to see our production facilities, products, compliance issues or have the factory audited. You can also send us any of the following along with the size and colors you want and required date for delivery.

An original sample of the items that you want to buy.
A clear sketch of the items with complete measurement sheet.
You team can ask us to send a sample from our own collection.
Merchandising team will give you our best price and send a counter sample as soon as possible with option of shipment date.

Mr. Md. Sohel Mollah

Contact Us Contact Details

Our Product Showcase

We've not posted any products yet! Please visit us later to find our products detail.

About our Company

Company
Multi Fibre Apparels Limited
Main Markets
Eastern Europe, East Asia, Southern Europe, Central America, Western Europe, Middle East
Export Ratio
71% - 80%
Products
Apparel, Pants, Sweat Shirts, Swimwear, Tank Top

Company Certificate / Brochure

Contact Us

Multi Fibre Apparels Limited

Mr. Md. Sohel Mollah

Sahera Tropical Centre, 218, Dr. Kudrat-e-khuda road, Dhaka.

Dhaka Dhaka 1205 Bangladesh

Send us a message